
Ergebnis 1 bis 3 von 3
-
Bin neu hier
- 15.09.2012, 15:22
- #1
Hallo,
ich bekomme immer riesige Dateien in das Verzeichnis
mnt/sdcard/GPS/broadcom
geschrieben.
Innerhalb von 10 sec. werden in der Regel über 300 MB !!geschrieben.
Hierbei wird zuerst ein Unterverzeichnis .tmp angelegt, dann wird die Datei in das broadcom Verzeichnis geschrieben. Der Dateiname wird wie folgt angelegt:
gl-2012-09-15-154912.txt
Ich nutze folgende Programme:
- Navigon Navigator
- run.gps
- Osmand+
- die Üblichen: Google earth, maps, Gps-Status ...,
Durch dieses Schreiben wird meine interne SD-Karte zugemüllt, oft habe ich daher gar keinen Speicher mehr frei. Zuletzt waren über 6 GB !!! an Daten in diesem Verzeichnis vorhanden. Hierdurch funktionieren natürlich andere Programme nur noch eingeschränkt.
Auf mein Note habe ich heute frisch auf das aktuelle Kies-Update ICS 4.04 installiert, das Problem bleibt. Das Handy ist gerooted.
Welches Programm oder welche Systemeinstellung ist hierfür verantwortlich ?
Gruß Martin2
Hier Auszug Text:
pid = 12422
16:46:08.588 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:08.588 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:08.588 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:08.589 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:08.589 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:08.589 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:08.589 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:08.589 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:08.589 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:08.589 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:08.589 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:08.589 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:08.590 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:08.590 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:08.590 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:08.590 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0,
....................... und am Ende
16:46:12.670 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:12.670 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:12.670 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:12.670 D/gpsd Connection::OnSelect(fd=33, rd=0, wr=1, err=0, user_data)
16:46:12.670 D/gpsd GlPlatfAiding::OnLbsAid(1) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:46:12.674 D/gpsd Connection closed by peer
16:46:12.674 D/gpsd TIMER LBS-connection DISARM
16:46:12.674 LBS_I: A384130I API: GlLbsOsDisconnected()
16:46:12.674 LBS_D: L384130D LbsConStateWaitForResponse : onDisconnected()
16:46:12.675 LBS_D: L384131D LbsConEngine:nSessionCompleted(error)
16:46:12.675 LBS_D: L384131D LbsConStateWaitForResponse : EXIT
16:46:12.675 LBS_I: A384131I CB: cbLbsOsTimerDisarm(3407776)
16:46:12.675 D/gpsd TIMER LBS DISARM
16:46:12.675 LBS_D: L384131D LbsConStateReady : ENTRY
16:46:12.675 D/gpsd GlPlatfAiding::OnLbsAid(0) type 2, timer A 0, m_bLbs 0, m_bSupl 0
16:53:13.386 D/gpsd GPSIS.INP.GPSE_MSG(6, 0x231b50, 2, -1, -1, 0x0);
16:53:13.386 I/gpsd: CustomerModule::OnMessage : MSG_BEFORE_DELETE_AIDING_DATA(87fd)
16:53:13.387 I/gpsd: START_MODE : 1
16:53:13.387 V/gpsd SetConfig: ignore_aiding_mask = 391
16:53:13.387 D/gpsd HalPlatf::SaveConfigState()
16:53:13.387 D/gpsd SuplConfig::SaveConfigState()
16:53:13.387 V/gpsd HalPlatf::SetCfgValue(ignore_aiding_mask, 391)
16:53:13.388 I/gpsd: Ignore Mask : 187
16:53:19.452 D/gpsd GPSIS.INP.GPSE_MSG(6, 0x231b50, 2, -1, -1, 0x0);
16:53:19.453 I/gpsd: CustomerModule::OnMessage : MSG_BEFORE_DELETE_AIDING_DATA(87fd)
16:53:19.453 I/gpsd: START_MODE : 1
16:53:19.453 V/gpsd SetConfig: ignore_aiding_mask = 391
16:53:19.453 V/gpsd HalPlatf::SetCfgValue(ignore_aiding_mask, 391)
16:53:19.453 I/gpsd: Ignore Mask : 187
16:53:22.208 D/gpsd GPSIS.INP.GPSE_MSG(9, 0x231b50, 4, -1, -1, 0x0);
16:53:22.208 I/gpsd: CustomerModule::OnMessage : MSG_SET_POSITION_MODE(1)
16:53:22.208 V/gpsd SetConfig: SyncLto = true
16:53:22.208 V/gpsd HalPlatf::SetCfgValue(SyncLto, true)
16:53:22.208 V/gpsd SetConfig: arp-supl-enable = true
16:53:22.208 V/gpsd HalPlatf::SetCfgValue(arp-supl-enable, true)
16:53:22.208 V/gpsd SetConfig: ReAidingType = 3
16:53:22.208 V/gpsd HalPlatf::SetCfgValue(ReAidingType, 3)
16:53:22.208 V/gpsd SetConfig: arp-supl-cap-msb = true
16:53:22.208 V/gpsd HalPlatf::SetCfgValue(arp-supl-cap-msb, true)
16:53:22.208 SUPL_D: GlSuplEngine::GetCapabilities()
16:53:22.208 SUPL_D: GlSuplEngine::SetCapabilities()
16:53:22.209 SUPL_D: PosTechnology: MSA MSB autonomous
16:53:22.209 SUPL_D: PrefMethod: no
16:53:22.209 SUPL_D: PosProtocol: RRLP
16:53:22.209 V/gpsd SetConfig: arp-supl-cap-msa = false
16:53:22.209 V/gpsd HalPlatf::SetCfgValue(arp-supl-cap-msa, false)
16:53:22.209 SUPL_D: GlSuplEngine::GetCapabilities()
16:53:22.209 SUPL_D: GlSuplEngine::SetCapabilities()
16:53:22.209 SUPL_D: PosTechnology: MSB autonomous
16:53:22.209 SUPL_D: PrefMethod: no
16:53:22.209 SUPL_D: PosProtocol: RRLP
16:53:22.210 GPSIS.INP.gps_set_position_mode(GPS_POSITION_MODE_MS_BASED(1), GPS_POSITION_RECURRENCE_PERIODIC(0), 1000, 4294967295, 1);
16:53:22.210 D/gpsd GpsInterfaceImpl::set_position_mode(1, 0, 1000, -1, 1)
16:53:22.210 D/gpsd GpsInterfaceStateIdle : OnSetPositionMode
16:53:22.211 GPSIS.INP.gps_start();
16:53:22.211 D/gpsd GpsInterfaceImpl::start(mode = 1, recurrence = 0, min_interval = 1000, preferred_accuracy = -1, preferred_time = 0)
16:53:22.211 D/gpsd GpsInterfaceStateIdle : OnStart
16:53:22.211 D/gpsd GpsInterfaceStateIdle : EXIT
16:53:22.211 D/gpsd GpsInterfaceStateStartingRequest: ENTRY
16:53:22.211 D/gpsd OnBeforeRequestStart
16:53:22.215 V/gpsd SetConfig: tlsEnable = false
16:53:22.215 V/gpsd HalPlatf::SetCfgValue(tlsEnable, false)
16:53:22.215 D/gpsd SuplConfig.bTLS = 0
16:53:22.215 OnBeforeRequestStart: tlsEnable false
16:53:22.215 V/gpsd SetConfig: acSuplServer = supl.google.com
16:53:22.215 V/gpsd HalPlatf::SetCfgValue(acSuplServer, supl.google.com)
16:53:22.215 OnBeforeRequestStart: acSuplServer supl.google.com
16:53:22.215 V/gpsd SetConfig: SuplPort = 7276
16:53:22.215 V/gpsd HalPlatf::SetCfgValue(SuplPort, 7276)
16:53:22.215 OnBeforeRequestStart: SuplPort 7276
16:53:22.215 V/gpsd SetConfig: cLogEnabled = false
16:53:22.215 V/gpsd HalPlatf::SetCfgValue(cLogEnabled, false)
16:53:22.215 C/gpsd cLogEnabled 1 => 0
GpsHalPlatfCloseLogFile
So sieht ein Hex-Auszug aus:
-
- 16.09.2012, 09:30
- #2
Wie wäre es, einfach jeweils immer eins Deiner vielen GPS Apps zu Löschen und damit zu eruieren, welches für den Datenmüll zuständig ist.
Ich würde mal blind auf run.gps und/oder GPS Status tippen.
-
Bin neu hier
- 20.09.2012, 11:36
- #3
So,
ich habe mal einige GPS-Tools deinstalliert, bei den anderen soweit möglich GPS-Logging usw. ausgeschaltet. Nach einem Neustart tritt nun das Problem nicht mehr auf.
Behalten habe ich:
- Navigon Navigator
- run.gps
- Osmand+
- die Üblichen: Google earth, maps, Gps-Status ...,
Trotzdem erstaunlich, was für eine Datenmenge das Note so wegschreiben kann.
Ähnliche Themen
-
/sdcard/ != mtp
Von skyzem im Forum Google Galaxy NexusAntworten: 4Letzter Beitrag: 25.07.2012, 08:37 -
Run GPS: Was sind KML u. GPX-Dateien und was macht man damit?
Von Frederickfilmen im Forum Windows Phone 7 AllgemeinAntworten: 4Letzter Beitrag: 24.06.2012, 10:52 -
cant mount /sdcard ? Hilfe
Von outsider1860 im Forum Samsung Galaxy S2 Root und ROM - GT-I9100Antworten: 2Letzter Beitrag: 10.05.2012, 13:54 -
SDCard für Desire
Von Troja im Forum HTC Desire SonstigesAntworten: 2Letzter Beitrag: 28.11.2010, 19:19 -
Wer kann Helfen?? WLAN SD Card, Leadtek GPS, MMS Dateien.
Von Victor Manuel im Forum Qtek Forum (PPC)Antworten: 1Letzter Beitrag: 11.08.2006, 09:46
Pixel 10 Serie mit Problemen:...