Kann ich nicht bestätigen. Läuft hervorragend.
Gesendet von meinem GT-I9100 mit Tapatalk
Druckbare Version
Bei mir läuft er auch super.
Hab grad gemerkt, dass dieses Problem nur im Ladezustand auftritt.
Edit. Ich korrigiere. Auch ohne am Ladegerät hängend passiert. Wollte gerät entsperren, aber nichts passiert. Akku raus. So ein Mist...
Also ich hatte bisher 2x Aufhängen mit dem neuen Kernel.
Außerdem im Quadrant BM ca 900 Punkte weniger.
Somit bin ich erstmal wieder zurück auf die 3.0b7
Bisher kein Hänger und im Quadrant wieder 4450 Punkte (auch wenns nicht so wichtig ist)
Gruß Trax74
Hatte gerade das gleiche problem dachte zuerst der accu sei lehr aber nach einem langen drücken der einschalttaste startete das galaxy wieder mit 49% ladung
Ein Glück, bin ich wenigstens nicht allein ^^ Mir ist jetzt noch in Spielen passiert. Komischerweise hat das Spiel an sich noch funktioniert, der Touchscreen sowie alle tasten haben nur nicht mehr reagiert. Naja ich bin erstmal auf speedmod.
Gesendet von meinem GT-I9100 mit Tapatalk
der rc2 zieht akku wie sau! Werd jetzt wieder zurück flashen auf 7b
Es gibt beim rc2 3 verschiedene Modis (im CWM einstellen)
-battery (spart akku)
-equal (ausgeglichen... heisst nicht equal, hab name vergessen)
-performance (Volle Leistung)
Es ist davon auszugehen dass performance akku verbraucht wie ein suchti seine zigaretten ;)
Sent from my GT-I9100 using Tapatalk
ich war auf equal und hab heute früh auf battery umgestellt. Ich habe die einstellungen schon gesehen ^^ Helfen tun Sie aber nicht so richtig und beim flashen neuer Kernels hatte ich eigentlich schon lange nicht mehr die üblichen pfuschereien bei den battery stats oder so ähnlich. Lief eigentlich immer gleich ohne Probleme.
Klappt bei euch unter rc2 und cm9 BLN? BLN Control sagt aktiviert,a ber da leuchtet nichts.
mit dem rc2 geht mein Handy aus, und anschliessend nach langem drücken wieder an und hat noch die hälfte vom akku...
Speedmod läuft jedoch ohne Probleme
Kann ich nicht bestätigen, hat mit der rc1 das Problem von SOD beim verbinden mit dem PC. Das ist aber nach einem erneuten flashen, wipen der Cache Partition und des Dalvik Caches nicht mehr aufgetreten!
SiyahKernel v3.0rc3
Posted on April 3, 2012
Changelog:
- Increased TCP buffer size
- Added support for ALL Samsung and CM9 based MIUI ROMs
- merged with upstream 3.0.y, and created a new branch which is updated to 3.0.27 (thanks to codeworkx@XDA for the help with git)
- removed pegasusq cpu governor
- fixed theme flashing problems in CWM Recovery
- fixed most of the lockups and freezes
- increased touch sensitivity a lot. let’s see if this makes anybody unhappy…
http://gokhanmoral.desean.net/siyahk...ah-v3.0rc3.tar
http://gokhanmoral.desean.net/siyahk...3.0rc3-CWM.zip
Also in Richtung Touchscreen Sensitivität tut sich endlich was, mit der RC3 aehr Smooth u. D keine Hänger mehr. Das hat mit an ICS doch noch am meisten genervt.
Gesendet von meinem GT-I9100 mit Tapatalk
SiyahKernel v3.0rc4
Posted on April 6, 2012
Changelog:
fixed liblights and it should be working on CM9 as it should have been.
fixed MIUI problem in initramfs (another typo)
fixed wifi toggling issue
http://gokhanmoral.desean.net/siyahk...ah-v3.0rc4.tar
http://gokhanmoral.desean.net/siyahk...3.0rc4-CWM.zip
BLN untern CM9 geht leider immer noch nicht. :(
ok. Jetzt gehts. BLN aus und wieder an gemacht...
3.0 Final ist bald da.
SiyahKernel v3.0
Posted on April 6, 2012
Changelog:
fixed android logger
added GENTLE_FAIR_SLEEPERS and ARCH_POWER config to ExTweaks interface
fixed kernel specific options in CWM Touch Recovery
added “Remove init.d scripts” option to kernel specific options menu
usb mass storage mode in CWM Touch Recovery (rc4 is updated for you to test this change)
used latest cm9 kernel’s (codeworkx’s) sensitivity values. works better than my previous values.
set SIO I/O scheduler as default
removed almost all external tweaking scripts of any kind
fixed FM radio problem in rc3 and rc4
http://gokhanmoral.desean.net/siyahk...Siyah-v3.0.tar
http://gokhanmoral.desean.net/siyahk...h-v3.0-CWM.zip
Läuft sehr gut mit MIUI V4.Endlich wieder BLN
geht bei euch MTP unter CM9?
wieso? scheint nicht ein CM9 Problem zu sein. Deswegen hier mal angefragt.
SiyahKernel v3.0.1
Changelog:
- fixed Task Manager/Active Tasks issue
- fixed module loading issue which was causing some weird problems such as fm radio not functioning or android logger not working.
- added fs and readahead optimization parts of thunderbolt scripts back (thanks to pikachu01@XDA)
- set vitalij value to 5 for default and battery profiles, 3 for performance. You can use ExTweaks to customize it to your taste.
- performance profile tweaks. you’ll have to reset profiles in CWM Recovery to be able to use new performance defaults.
- adbd, init, recovery and lights.exynos4.so are recompiled using latest cm9 sources.
DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)
SiyahKernel v3.0.1
Posted on April 8, 2012
Changelog:
fixed Task Manager/Active Tasks issue
fixed module loading issue which was causing some weird problems such as fm radio not functioning or android logger not working.
added fs and readahead optimization parts of thunderbolt scripts back (thanks to pikachu01@XDA)
set vitalij value to 5 for default and battery profiles, 3 for performance. You can use ExTweaks to customize it to your taste.
performance profile tweaks. you’ll have to reset profiles in CWM Recovery to be able to use new performance defaults.
adbd, init, recovery and lights.exynos4.so are recompiled using latest cm9 sources.
received lots of feedback from users who experienced wifi problems that this one doesn’t have any wifi toggling bug.
EDIT: updated on 9th April, 2012 to fix auto turn-on problem while charging in off mode (Samsung ROMs only). If you are on a Samsung ROM or MIUI please download again.
http://gokhanmoral.desean.net/siyahk...yah-v3.0.1.tar
http://gokhanmoral.desean.net/siyahk...v3.0.1-CWM.zip
Er hat nochmal was gefixt.
Wie siehts bei euch mit Undervolting unter ICS aus? Nutze aktuell CM9 vom 04.04.2012 mit dem Siyah 3.0.0 und im Vergleich zu GB (CM 7 und Siyah) kann ich fast nichts Undervolten ohne Freeze. Ist das bei euch auch so? Damals hatte ich z.B. bei 200Mhz 825mV ? Aktuell macht er mir schon bei 875mV Probleme.
Governor = Smartass V2
Scheduler = sio
Wie ist eure Erfahrung unter ICS?
Danke
Kann nichts dazu sagen, ich nutze ihnso wie er ausgeliefert wird und stelle dann nur unter CWM auf Battery ein. Fertig, das reicht mir und ich bin glücklich.
Hi mit dem letzten Kernel update kann ich keine klingel tönen mehr ändern hat das noch jemand? Kernel 3.0.1
Gruß
Dirk
Sent from my GT-I9100 using Tapatalk 2
ich habe es über die Musik Software gemacht.
SiyahKernel v3.1beta1
Posted am 11.04.12
Changelog:
- touchscreen sensitivity tweaks
- sio fifo_batch=1
- set default usb mode to mass_storage for MIUI ROMs.
- disabled smooth scaling for interactive based governors (lulzactive and interactive)
- prevented tick sound after reboots or in download/recovery modes
- Dual-booting
For now, you will only have one additional option available in CWM Touch Recovery and that is cloning your primary ROM as secondary.
If you want to have another ROM as secondary ROM, follow these steps:
- Make a nandroid backup of your existing ROM
- wipe everything and install the other ROM
- Boot the ROM and make customizations. Don’t forget to reflash SiyahKernel if the ROM flashes another kernel.
- Use CWM Touch Recovery to clone your rom as secondary rom.
- Restore nandroid backup
Keep in mind that you will not be able to flash additional CWM packages to the secondary ROM. Therefore, it is important that you have flashed all additional packages and customizations in the third step before you make the clone in the 4th step.
Some notes about dualbooting:
- If you do not make any cloning you won’t be prompted to boot the second ROM.
- you may need to reflash this kernel after a nandroid restore if your nandroid backup is created with another kernel.
- there is no progress bar during the cloning process. it will be implemented later but for now, be patient because the size of data is huge and may take up to 10 minutes to clone.
- there are some checks missing. for example if you do not have enough space in your internal sdcard (you need 2.1GB free space) you will not get a warning or error, but dual booting won’t work. remember, this is beta and not all features are implemented yet. In time, other dual-booting options in CWM Touch Recovery will be implemented.
- you won’t be able to use mass storage mode for /sdcard in second rom because we have our data and cache partitions on /sdcard. only external sdcard will be mounted if you are using mass_storage mode. mtp should work fine for sdcard.
- once again, you won’t be able to flash any CWM flashable zip to second ROM.
DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)
sehr nice,... endlich dualboot :cool:
SiyahKernel v3.1beta2
Posted am 11.04.12
Changelog:
- fixed high memory usage
- fixed booting Samsung ROMs as the second ROM
- no need to fix CWM Manager backup issue. If you use any action in CWM Manager it will only boot to recovery because CWM Touch Recovery only works for the primary ROM. The commands are created in secondary ROM’s cache partition if you use CWM Manager in the second ROM, therefore they will be ineffective in the recovery mode.
- re-enabled CGROUP_TIMER_SLACK and SCHED_AUTOGROUP
- reapplied ondemandx patch (I forgot to put it back in v3.0 release. it should be the reason of having more battery drain with 3.0 than 3.0rc2)
DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)
Ich war immer konservativ in Sachen Kernel flashen. Außer dem eigentlich zum ROM zugehörigen, hab ich nie experimentiert.
Nun hab ich aber mein Ladegerät vergessen und nun schon seit mehr als einer Woche nicht zur Hand und ständig per USB laden geht krass auf die Geduld.. Hab dann gestern mal gesucht, wie man da mehr Power rausholen kann aus dem USB Kabel und bin sogleich auf den Siyah gestoßen.
Fazit: Bombe!
Nicht nur, dass ich endlich wieder ordentlich Saft ins Gerät bekomme, ich hab auch zum ersten mal mich mit den Governorn auseinandergesetzt und mit UV...doppel Bombe ^^ Steht auf der Beobachtungsliste der Thread. Richtig feine Sache.
Soweit ich weiss geht das mur mit den gb versionen da konnte man die ladespannung rrhöhen so das sie mit der eines netzteils gleichzusetzen ist. Bei der ics version geht diese option aber noch nicht ausser sie ist schon fest integriert das weiss ich aber nicht.
Sent from my GT-I9100 using Tapatalk 2
Wie blasen schon sagt, kann man mit dem Tool ExTweaks unter MISC/CHARGE CURRENT die Ladespannung von 450mA auf 650mA erhöhen! Nur soweit ich weiss gibt der USB (2) Port vom PC nicht mehr wie 500mA her, also kann nicht viel passieren! USB 3 gibt da mehr her!
Und die Erhöhung von 450 mA auf 500 mA (weil der Port nicht mehr her gibt) bring echt eine spürbar schnellere Ladegeschwindigkeit?