SiyahKernel ICS-R 3.0alpha7-LPQ
Warning: This is for Samsung’s ICS ROM only.
Changelog:
- insecure adb although we have ro.secure is set to 1
DOWNLOAD TAR (für Odin)
Download ZIP (für CWM Recovery)
Sent from my Gameboy Color with Zelda in Slot1
Druckbare Version
SiyahKernel ICS-R 3.0alpha7-LPQ
Warning: This is for Samsung’s ICS ROM only.
Changelog:
- insecure adb although we have ro.secure is set to 1
DOWNLOAD TAR (für Odin)
Download ZIP (für CWM Recovery)
Sent from my Gameboy Color with Zelda in Slot1
hi,
bei mir geht bei 3.0alpha7-LPG Radio net :((
Das warten hat ein Ende!!!
Samsung i9100 ICS Kernel Sources
Posted on March 19, 2012
Samsung i9100 ICS kernel sources are released.
and it compiles :) (just finished compiling)
-rw-rw-r– 1 gm gm 7416400 2012-03-19 15:27 zImage
I’ll just need some time tonight :)
Juhu,
dann wird hoffentlich bald BLN funktionieren.
Da kann ich mich nur anschließen hyper und Check :D. Endlich könnt wieder ein bisschen leben hier rein!
Gesendet von meinem GT-I9100 mit Tapatalk
SiyahKernel v3.0beta2 for ICS
vom 20.03.12
Do not use this kernel with a Gingerbread ROM. use v2.6.14 or v2.6.13 with GB. v3.0 is for ICS only.
- Custom CWM touch recovery with swipe gestures
- CPU underclock support
- tweakable vitalij’s value (set to 5 as default)
- fixed fuelalert wakelocks
- you can disable android logger using ExTweaks app
- you’ll have lots of options in ExTweaks. faster charging mode is one of them.
- added conservative, interactive, lulzactive and smartass2 governors
- gpu voltage, clock and stepcount interfaces. use ExTweaks from the market to configure them
- tegrak’s touchmove support. you’ll have to tweak it with extweaks and test it with touchmove app until tegrak adds ICS support to the app.
- brightness curve settings with original panel gamma values. panel values unchanged, so you will get stock colors and will be able to use supercurio’s voodoo display app when it is released. brightness modification will only change auto-brightness response.
- better touch sensitivity (especially while charging
overclocking and bln support were removed temporarily.
Download wegen Problemen mit dieser Version entfernt!
Edit: So richtig rund läuft der natürlich noch nicht, heute Morgen beim aufstehen ein SOD! Sonst habe ich das gefühl das das Touch verhalten besser ist!
Hmm,
läuft der unter CM 9? Es steht nicht da dass er nicht für CM 9 gedacht ist.
Nein scheint nicht zu laufen mit cm9.
Habe es gerade selbst getestet.
Sent from my Gameboy Color with Zelda in Slot1.
touchverh. etwas besser, dafür scrollen deutlich schlechter
Gerade bei XDA gelesen!
Er hat die downloads entfernt!
ja, das ist das problem... er haut viel zu viele raus wo zu wenig getestet sind.
Esten Post aktualisiert! Gokhanmoral hat jetzt einen extra ICS Kernel Thread auf xda eröffnet!
http://forum.xda-developers.com/show....php?t=1555259
---------- Hinzugefügt um 16:01 ---------- Vorheriger Beitrag war um 15:01 ----------
SiyahKernel v3.0beta3 (for ICS only)
Posted on March 20, 2012
beta versions are tested (if they are tested at all :) ) only on stock samsung rom.
I highly recommend you to flash siyah-resetdefaultprofile.zip just after you flash this kernel.
Changelog:
- enabled overclocking again. I hope that I have managed to prevent the usage of 1400 and 1600MHz steps during and after boot, until the user sets them as the highest level.
- fm radio should be working now
- removed deep sleep parameters (cpu and busfreq levels)
- re-enabled the missing governors in beta2 (lulzactive, conservative,smartassV2 and interactive)
- disabled smooth_scaling on lulzactive and interactive governors, as it was in GB kernel
- fixed undervolting problems.
- lzma compression to have a smaller image to save bandwidth at the cost of a bit slower boot time.
- re-enabled BLN support, but we still need liblights.
DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)
jo, hab laufen... scrollen immer noch hakeliger als mit cf
Denke vor dem erst rc Status werden noch viele beta Versionen kommen.
Schade das er sich nicht zeit lässt mit dem releasen.
Sent from my Gameboy Color with Zelda in Slot1.
SiyahKernel v3.0beta4 (for ICS only)
vom 20.03
changelog:
- full BLN support
- fixed brightness problems
- added SIO(default) and VR I/O schedulers
- some config changes (RCU boost, autogroup, etc)
- fixed recovery problems. I advice you to recreate nandroid backups that you have created with beta versions or you’ll have to create md5 checksums manually. sorry for that. I noticed that I left some part of a script commented out while trying dual booting.
- experimental mtp modifications to support both samsung and cm9 roms (thanks to codeworkx for the suggestion). If it doesn’t work cm9 guys will have to wait until I find some more time to fix it.
Known problems:
- this kernel doesn’t support any samsung rom prior to LPQ (this is not a problem but I wanted to mention this first)
- you may have to use another bootloader to use this kernel (details @ XDA thread)
- overclocking still have some problems. I will try to solve it in the next release. cpu doesn’t scale to higher frequencies.
DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)
heißt das er könnte mit cm9 laufen????Zitat:
experimental mtp modifications to support both samsung and cm9 roms (thanks to codeworkx for the suggestion). If it doesn’t work cm9 guys will have to wait until I find some more time to fix it.
Ich hatte den verdacht!:(
Gute Sache dieser Kernel,
Rom: Darky HD Base XLQ mit Ficetos Mod v3
- Funktionierende BLN (mittel BLN-Control App aus Market )
- Gute Akkuperformance
- Touch reagiert eleganter
Anhang 94569
SiyahKernel v3.0beta5
Once again, this kernel is for ICS ROMs only, but this doesn’t mean that it will support all ICS ROMs. It supports only Samsung Stock ICS ROMs for now and maybe work on CM9 and recent CM9 variants. If you have BLACK BLANK SCREEN after flashing this kernel then I am sorry that you will have to wait for your ROM developer to update the base or find another ROM if you want to use this kernel.
Changelog:
- fixed GPU overclocking/undervolting problems
- I think I fixed the problems with brightness curve (line actually, but it may not be completely linear because of min_bl setting. therefore, I still call it curve. I was thinking about making it a second order polynomial.anyway.. this works and one my CS instructors told me to leave something alone if it worked. almost all of my EE instructors think otherwise… well… we’ll see)
- some extweaks fixes (i/o schedulers added, some descriptions modified)
- compiled with linaro toolchain 4.5-2012.03
- CIFS
- fixed overclocking problem (not using freq > 1200MHz)
- fixed touchkey backlight staying on even if you set it to always off
DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)
edit: Scheint jetzt wirklich mit CM9 zu funktionieren. Bei mir geht's zumindest.
MTP klappt damit unter CM9 aber wieder nicht. Ich kann damit aber leben da ich jetzt wenigstens nicht mehr diese Performance Schwankungen wie mit dem Standard Kernel habe.
Nicht flachen grün Stich und cwm recovery geht nicht mehr!!!!
Gesendet von meinem GT-P7501 mit Tapatalk
Einen Grünstich habe ich zum Glück nicht aber das mit CWM kann ich bestätigen.
Wichtig:
Er hat die Downloads wieder runter genommen von der beta 5.
Zitat von ihm:
will be reuploaded after fixing the recovery problem
Sent from my Gameboy Color with Zelda in Slot1.
Die Beta ist wieder verfügbar. Er hats es anscheinend gefixt.
Jetzt geht alles!
Gesendet von meinem GT-P7501 mit Tapatalk
SiyahKernel v3.0beta6
Posted am 23.03.2012
I recommend you to reset extweaks settings from CWM Recovery advanced menu after flashing this kernel.
Changelog:
- removed some tweaks to have better performance (sounds weird? yes, it does)
- rebooting into download mode with cm9 phone options menu (holding the power button) is now working (yes, I am on CM9 now)
- “Reset customconfig profiles” in CWM recovery “advanced” menu.
- XZ compression
- fixed MTP problem in CyanogenMod. (Thanks to codeworkx. Although I didn’t do exactly what he suggested his suggestion made this possible). I hope I didn’t break Samsung part ;)
- RWSEM_XCHGADD_ALGORITHM
- fixed adb in recovery mode
- optimized CRC algorithm
- CONFIG_TINY_SHMEM
- removed powersave and userspace governors
- enabled IKCONFIG
DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)
Hab ihn drauf und kann nix negatives sagen. Läuft unter CM9 sauber und stabil bisher.
Gesendet von meinem GT-I9100 mit Tapatalk
Hi Leute! Hab mir vorher grad den Beta6 geflasht und jetzt erkennt er die interne sd-card nicht mehr! Hat jemand das gleiche problem oder vielleicht ne lösung dafür? Thx im Voraus
edit: Sry hat sich erledigt, wer lesen kann is klar im vorteil ;-)
So ich habe den beta 6 seit ca 12 Std auf der aktuellsten cm9 laufen.
Für eine frühe beta läuft er recht gut.und
Endlich wieder bln.
Sent from my Gameboy Color with Zelda in Slot1.
@Luqutus
@Fuzzy
Siyah3b6 unter cm9. Welche dpi nutzt ihr? Ich habe es bis jetzt nur mit 182 probiert, bekam aber nur Schwarzbild. Habe jedoch nicht auf 240 getestet.
LG SGSII
gesendet mit Tapatalk 2 beta -> xda thread 1561089
Morgen, alles auf Standard gelassen.
Läuft echt gut, ich meine der Akku lief auch etwas besser. Kann auch Einbildung sein. :p
Ich nutze den aktuellen Siyah mit conservativ und Deadline läuft super flüssig und akku auch sehr gut. Verbrauche mit 3g immer on in 2sdt.30min. 1% akku natürlich Standby drei emailkonten synchronisieren sowie Wetter.
Aktuell:
RomMIX_RombyRush_ICS.4.0.3_XXLPQ
Jap, ich bin auch echt Positiv überrascht, was Gokhanmoral da schon auf die Beine gestellt hat.:respekt: Kann euch nur bestätigen!
MfG
Bin gespannt wann nen fix kommt bezüglich SD Karte, auf Dauer sicherlich keine Lösung :D
Sonst scheints rund zu laufen.
SiyahKernel v3.0beta7
Posted am 27.03.2012
Changelog:
- LZO compression for faster booting
- SLQB
- Charge current interface (thanks to Entropy512). You can now use currentwidget to see how fast your devices is being charged.
- Tegrak’s 2ndCore app support (thanks to pulser_g2@XDA) + ExTweaks interface to disable/enable/force hotplugging second core.
- arm topology support (sched_mc) from linaro
- CGROUP_TIMER_SLACK
- enabled last_kmesg
- lowered GPU lowest voltage level to 800mV
- fixed hotplug rate setting in ExTweaks
- removed autocopying of liblights for CM9 and clones. I will provide separate lights library for those ROMs
- removed ntfs-3g binary from the kernel because we exceed 8MB size with LZO compression which is the fastest one. I’ll provide it as a CWM-flashable zip later.
- fixed blank screen problem with custom dpi on cm9 based ROMs.
- disabled MTP support for CM9 ROMs temporarily. use this app to get mass storage working on CM9: http://forum.xda-developers.com/show....php?t=1389375
- fixed low benchmark with higher frequencies
DOWNLOAD TAR (for Odin)
DOWNLOAD ZIP (for CWM Recovery)