[Kernel] AbyssN3 Kernel v1.7.0 (SM-N9005) Stable Version
Abyss SM-N9005 Kernel v1.7.0 Stable Version by Angelom
Unglaublich, eben beim Aktualisieren des S4 Kernel Threads das hier gefunden! Danke an den Enwickler.:top:
Stammthread: http://www.nonsolosmartphone.it/abys...005-t7846.html
Achtung: Der Kernel ist nur für das SM-N9005 und Samsung Firmwares geeignet!
Weder ich, PocketPC.ch, noch der Entwickler übernehmen die Haftung bei Schäden am Gerät nach dem flashen dieses Kernel!
Achtung: Nachdem Sie den Kernel installiert haben, wenn das Telefon zuerst startet und ein zweites Mal ravvierà Boot: Keine Sorge, es ist normal und notwendig für die Installation einiger Dateien. Nach dem ersten Start wird alles normal funktionieren
Nach der Installation des Kernels wird automatisch "wipe cache partition" und "wipe dalvik cache"
http://i1303.photobucket.com/albums/...ps6e350503.gif
AbyssN3 Kernel v1.7.0 "Nur für Samsung Firmwares ab der MJ6":
http://dfiles.eu/files/ylvsh61b1
"Vor dem flashen solltet Ihr beachten das unter Einstellungen/Optionen/Sicherheit die Reaktivierungssperre deaktiviert ist."
Installation:
- kopiert die Abyss Kernel zip auf das Gerät
- im ausgeschalteten Zustand mit Vol+,Home und Power gleichzeitig gedrückt halten in das Recovery (CWM, TWRP) booten
- vor dem flashen des Kernels ist es ratsam, einen Cache-wipe und Dalvik-Cache wipe durchzuführen.
- mit "install zip from sdcard > choose zip from sdcard" die Rom Cleaner zip flashen
Changelog:
Code:
v1.7.0 "Nur für Samsung Firmwares ab der MJ6"
http://dfiles.eu/files/ylvsh61b1
mdnie lite control: add control interface
mm/slab, slob, slub: Full Sync 3.10.x kernel
mm/mm_init.c: Full Sync 3.10.x kernel
kernel/bounds.c: Full Sync 3.10.x kernel
kernel/bounds.c: Full Sync 3.10.x kernel
kernel/capability.c: Full Sync 3.10.x kernel
kernel/context_tracking.c: Full Sync 3.10.x kernel
kernel/cred.c: Full Sync 3.10.x kernel
kernel/cpuset.c: Full Sync 3.10.x kernel
kernel/exit.c: Full Sync 3.10.x kernel
kernel/extable.c: Full Sync 3.10.x kernel
kernel/futex.c: Full Sync 3.10.x kernel
kernel/groups.c: Full Sync 3.10.x kernel
kernel/jump_label.c: Full Sync 3.10.x kernel
kernel/kallsyms.c: Full Sync 3.10.x kernel
kernel/kexec.c: Full Sync 3.10.x kernel
kernel/kprobes.c: Full Sync 3.10.x kernel
kernel/ksysfs.c: Full Sync 3.10.x kernel
kernel/mutex.c: Full Sync 3.10.x kernel
kernel/panic.c: Full Sync 3.10.x kernel
kernel/range.c: Full Sync 3.10.x kernel
kernel/relay.c: Full Sync 3.10.x kernel
kernel/rtmutex.c: Full Sync 3.10.x kernel
kernel/srcu.c: Full Sync 3.10.x kernel
kernel/task_work.c: Full Sync 3.10.x kernel
kernel/tracepoint.c: Full Sync 3.10.x kernel
kernel/uid16.c: Full Sync 3.10.x kernel
kernel/wait.c: Full Sync 3.10.x kernel
SMP: Updated SMP from 3.10.x kernel
workqueue: don't use WQ_HIGHPRI for unbound workqueue
workqueue: factor out worker_pool from global_cwq
workqueue: use @pool instead of @gcwq or @cpu where applicable
workqueue: separate out worker_pool flags
workqueue: introduce NR_WORKER_POOLS and for_each_worker_pool()
workqueue: reimplement WQ_HIGHPRI using a separate worker_pool
workqueue: drop CPU_DYING notifier operation
workqueue: ROGUE workers are UNBOUND workers
workqueue: trivial fix for return statement in work_busy()
workqueue: add WARN_ON_ONCE() on CPU number to wq_worker_waking_up()
workqueue: use new hashtable implementation
workqueue: consider work function when searching for busy work items
workqueue: fix find_worker_executing_work() brekage from hashtable conversion
workqueue: set PF_WQ_WORKER on rescuers
workqueue: move struct worker definition to workqueue_internal.h
workqueue: unexport work_cpu()
workqueue: use std_ prefix for the standard per-cpu pools
workqueue: make GCWQ_DISASSOCIATED a pool flag
workqueue: introduce WORK_OFFQ_CPU_NONE
workqueue: add worker_pool->id
Updated Workqueue from 3.10.x kernel
ACPI / processor: prevent cpu from becoming online
Many other patches
v1.5.0 "Nur für Samsung Firmwares ab der MJ6"
http://dfiles.eu/files/e9sm17z7i
Added 3.4.72 Linux patches
kernel/printk.c: Full Sync 3.10.x kernel
lib/idr.c; Sync with 3.10.x kernel
fs/nls: Full Sync 3.10.x kernel
mm/shmem.c: Sync with 3.10.x kernel
drivers/clk Full Sync with 3.10.x kernel
ARM: use phys_addr_t for DMA zone sizes
of: Specify initrd location using 64-bit
ARM: virt: Add boot-time diagnostics
arm: Use generic timer broadcast receiver
ARM: 7651/1: remove unused smp_timer_broadcast #define
mm: implement WasActive page flag (for improving cleancache)
/dev/mem: use phys_addr_t for physical addresses
ARM: mm: fix boot on SA1110 Assabet
ARM: LPAE: use phys_addr_t for initrd location
ARM: LPAE: use phys_addr_t in free_memmap()
ARM: fix warning on uninitialized offset.un
ARM: cleanup undefined instruction entry code
ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported
init: remove permanent string buffer from do_one_initcall()
Disable /dev/port interface on systems without an ISA bridge
drivers/char/mem.c: fix small coding style issues
char: add aio_{read,write} to /dev/{null,zero}
drivers: char: mem: use IS_ERR_VALUE() in memory_lseek()
/dev/oldmem: Remove the interface
rbtree: empty nodes have no color
rbtree: move some implementation details from rbtree.h to rbtree.c
rbtree: faster augmented rbtree manipulation
rbtree: remove prior augmented rbtree implementation
rbtree: add RB_DECLARE_CALLBACKS() macro
mm: replace vma prio_tree with an interval tree
rbtree: move augmented rbtree functionality to rbtree_augmented.h
mm: interval tree added
mm anon rmap: replace same_anon_vma linked list with an interval tree
mm: add CONFIG_DEBUG_VM_RB build option
mm: export a function to get vm committed memory
mm: add anon_vma_lock to validate_mm()
mm: augment vma rbtree with rb_subtree_gap
mm: check rb_subtree_gap correctness
mm: vm_unmapped_area() lookup function
mm: protect against concurrent vma expansion
mm: added vm_unmapped_area
mm: remove free_area_cache
mm: use vm_unmapped_area() on arm architecture
mm: fix kernel BUG at huge_memory.c
mm/hugetlb.c: fix warning on freeing hwpoisoned hugepage
mm/bootmem.c: remove unused wrapper function reserve_bootmem_generic()
Many other patches
v1.4.1 F "Nur für Samsung Firmwares ab der MJ6"
http://dfiles.eu/files/9tt6vh6w6
Added 3.4.71 Linux patches
Cleancache: Full Sync code from 3.10.x Linux
Ptrace; Full Sync code from 3.10.x Linux
Frontswap: Full Sync code from 3.10.x Linux
kernel/fork.c: Full Sync code from 3.10.x Linux
kernel/exit.c: Full Sync code from 3.10.x Linux
kernel/stop_machine.c: Full Sync code from 3.10.x Linux
kernel/kmod.c; full SYNC with 3.10.x Linux
kernel/cpuset.c; full SYNC with 3.10.x Linux
kernel/softirq.c; full SYNC with 3.10.x Linux
fs/ramfs: full SYNC with 3.10.x Linux
fs/notify: full SYNC with 3.10.x Linux
fs/ecryptfs: full SYNC with 3.10.x Linux
kernel/sched updated
Lowmemorykiller updated
MM: Major SYNC from 3.10.x kernel
ARM: introduce atag_offset to replace boot_params
ARM: constify machine_desc structure uses
ARM: 7505/1: split out ATAGS parsing
ARM: 7602/1: Pass real "__machine_arch_type" variable to setup_machine_tags() procedure
ARM: 7506/1: allow for ATAGS to be configured out when DT support is selected
ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on ASID-capable CPUs
sched: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW
ARM: Remove current_mm per-cpu variable
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current
ARM: 7502/1: contextidr: avoid using bfi instruction during notifier
ARM: mm: remove IPI broadcasting on ASID rollover
ARM: mm: avoid taking ASID spinlock on fastpath
ARM: mm: use bitmap operations when allocating new ASIDs
ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs
ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM
ARM: 7649/1: mm: mm->context.id fix for big-endian
ARM: 7658/1: mm: fix race updating mm->context.id on ASID rollover
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable
ARM: 7661/1: mm: perform explicit branch predictor maintenance when required
ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations)
ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>
ARM: 7432/1: use the new linux/sizes.h
userns: Add kuid_t and kgid_t and associated infrastructure in uidgid.h
kill daemonize()
Many other fixes
Based on Samsung SM-N9005 Update3 Sources
Added 3.4.70 Linux patches
kernel/timer.c full SYNC with 3.10.x Linux
kernel/time.c full SYNC with 3.10.x Linux
kernel/sys.c full SYNC with 3.10.x Linux
Binder full SYNC with 3.10.x Linux
Logger full SYNC with 3.10.x Linux
fs/proc full SYNC with 3.10.x Linux
kernel/user.c full SYNC with 3.10.x Linux
kernel/user_namspace.c full SYNC with 3.10.x Linux
kernel/kmod.c full SYNC with 3.10.x Linux
kernel/time full sYNC with 3.10.x Linux
- clocksource: Always verify highres capability
- clocksource: Add module refcount
- clocksource: Provide unbind interface in sysfs
- alarmtimer: Export symbols of functions declared in linux/alarmtimer.h
- sched_clock: Make ARM's sched_clock generic for all architectures
- ARM: sched_clock: Load cycle count after epoch stabilizes
- Many other patches
Updated kernel/sched
- sched: Use this_rq() helper
- sched/autogroup: Fix race with task_groups list
- sched: Remove redundant update_runtime notifier
- sched: Update rq clock before migrating tasks out of dying CPU
- sched: Update rq clock before setting fair group shares
- sched: Update rq clock before calling check_preempt_curr()
- sched: Use swap() macro in scale_stime()
- sched/fair: Remove unused variable from expire_cfs_rq_runtime()
- sched/rt: Simplify pull_rt_task() logic and remove .leaf_rt_rq_list
- sched: Optimize build_sched_domains() for saving first SD node for a cpu
- sched: Create for_each_sd_topology()
- sched: Fix clear NOHZ_BALANCE_KICK
- Many other patches
ARM: implement optimized percpu variable access
ARM: restart: allow platforms more flexibility specifying restart mode
reboot: move shutdown/reboot related functions to kernel/reboot.c
reboot: move arch/x86 reboot handling to generic kernel
init: disable sparse checking of the mount.o source files
init_task: Create generic init_task instance
Fixed init/main.c
Many other patches
v1.3.1 F "Nur für Samsung Firmwares ab der MJ6"
http://dfiles.eu/files/fnppolu15
Added 3.4.69 Linux Patches
block SYNC with 3.10.x kernel
kernel/hrtimer SYNC with 3.10.x kernel
kernel/posix-cpu-timers SYNC with 3.10.x kernel
kernel/posix-timers SYNC with 3.10.x kernel
kernel/semaphore.c full SYNC with 3.10.x Linux
kernel/seccomp.c full SYNC with 3.10.x Linux
ashmem.c : SYNC with 3.10.x Linux
Updated auto-hotplug
gnu: Added conservative scaling policy
new_helper; file_inode(file)
irq: Remove IRQ_EXIT_OFFSET workaround
kernel: delete __cpuinit usage from all core kernel files
rcu: delete __cpuinit usage from all rcu files
drivers: delete __cpuinit usage from all remaining drivers files
freezer: add unsafe versions of freezable helpers for NFS
freezer: add unsafe versions of freezable helpers for CIFS
freezer: shorten freezer sleep time using exponential backoff
freezer: convert freezable helpers to freezer_do_not_count()
freezer: convert freezable helpers to static inline where possible
freezer: add new freezable helpers using freezer_do_not_count()
freezer: kill PF_FREEZING
freezer: change ptrace_stop/do_signal_stop to use freezable_schedule()
HACK: ARM: disable sleeping while atomic warning in do_signal
lockdep: remove task argument from debug_check_no_locks_held
locked: check that no locks held at freeze time
tracing/lockdep: Disable lockdep first in entering NMI
smp: remove 'priv' of call_single_data
CPU hotplug: provide a generic helper to disable/enable CPU hotplug
Many other patches
Based on Samsung SM-N9005 Update2 Sources
SYNC workqueue code from 3.10.x Kernel
SYNC kthread code from 3.10.x Kernel
SYNC async code from 3.10.x Kernel
SYNC cpu code from 3.10.x Kernel
SYNC rwsem to 3.12.x kernel
Added interface to Enable/Disable Logger
hlist: drop the node parameter from iterators
ARM: 7461/1: topology: Add arch_scale_freq_power function
sched: replace PF_THREAD_BOUND with PF_NO_SETAFFINITY
introduce N_MEMORY
Manu other patches
v1.2.1F
http://dfiles.eu/files/b245p6sit
Added 3.4.68 Linux Patches
Sync Core from 3.10.x kernel
Full Sync kernel/sched from 3.10.x kernel
Full sync kernel/time from 3.10.x kernel
SYNC to all RCU code from 3.10.x Kernel.
New RCU mode Enabled
uksm-3.10: merge UKSM for 3.10.x kernel
Fixed some issues on cpufreq
Added context_tracking: New context tracking susbsystem
arm: Add generic timer broadcast support
switch the protection of percpu_counter list to spinlock
lib/vsprintf.c: "%#o",0 becomes '0' instead of '00'
vsprintf: correctly handle width when '#' flag used in %#p format
vsprintf: further optimize decimal conversion
vsprintf: add %pMR for Bluetooth MAC address
lib/vsprintf.c: kptr_restrict: fix pK-error in SysRq show-all-timers(Q)
vsprintf: add support of '%*ph[CDN]'
lib: vsprintf: optimize division by 10 for small integers
lib: vsprintf: optimize division by 10000
lib: vsprintf: optimize put_dec_trunc8()
lib/vsprintf.c: improve standard conformance of sscanf()
Many other patches
v1.2.0
http://dfiles.eu/files/fnlov1jpa
Based on Samsung SM-N9005 Update1 Sources
smp: Add generic smpboot facility
smp: Add task_struct argument to __cpu_up()
smp: Provide generic idle thread allocation
stop_machine: Use smpboot threads
smp, idle: Allocate idle thread for each possible cpu during boot
smpboot, idle: Optimize calls to smp_processor_id() in idle_threads_init()
smpboot: Provide infrastructure for percpu hotplug threads
smpboot: Allow selfparking per cpu threads
stop_machine: Mark per cpu stopper enabled early
kthread: Implement park/unpark facility
task_work_add: generic process-context callbacks
trim task_work: get rid of hlist
genirq: reimplement exit_irq_thread() hook via task_work_add()
trimming task_work: kill ->data
merge task_work and rcu_head
move exit_task_work() past exit_files() et.al.
deal with task_work callbacks adding more work
task_work: add a scheduling point in task_work_run()
task_work: Make task_work_add() lockless
task_work: task_work_add() should not succeed after exit_task_work()
mm: introduce a common interface for balloon pages mobility
idle: Implement generic idle function
idle: Provide a generic entry point for the idle code
lib: Proportions with flexible period
list: add a new LRU list type
string: introduce memweight()
time: Convert CONFIG_GENERIC_TIME_VSYSCALL to CONFIG_GENERIC_TIME_VSySCALL_OLD
time: Introduce new GENERIC_TIME_VSYSCALL
timekeeping: Cast raw_interval to u64 to avoid shift overflow
time: Kill xtime_lock, replacing it with jiffies_lock
time: export time information for KVM pvclock
sched/nohz: Fix rq->cpu_load[] calculations
sched: Fix race in task_group()
sched: Fix nohz_idle_balance()
sched: Fix load avg vs cpu-hotplug
sched/numa: Rewrite the CONFIG_NUMA sched domain support
Many other patches
v1.1.1 Final
http://dfiles.eu/files/qi8uh77se
Added 3.4.67 Linux Patches
Add krait-regulator-pmic driver
Increase max krait voltage
arm/crypto: Add optimized AES and SHA1 routines
Switch the protection of percpu_counter list to spinlock
iov_iter: move into its own file
iov_iter: hide iovec details behind ops function pointers
iov_iter: add bvec support
d*0: Convert direct_IO to use iov_iter
d*0: add bio_vec support to __blockdev_direct_IO()
fs: pull iov_iter use higher up the stack
aio: add aio_kernel_() interface
loop: use aio to perform io on the underlying file
fs: create file_readable() and file_writable() functions
fs: add read_iter and write_iter to several file systems
ecrpytfs: Convert aio_read/write ops to read/write_iter
tmpfs: add support for read_iter and write_iter
aio: convert the ioctx list to radix tree
exfat: AIO Optimization compatibility fixup
slub: use __SetPageSlab function to set PG_slab flag
slub: Use freelist instead of "object" in __slab_alloc
slub: Add frozen check in __slab_alloc
slub: Simplify control flow in __slab_alloc()
slub: Separate out kmem_cache_cpu processing from deactivate_slab
slub: pass page to node_match() instead of kmem_cache_cpu structure
slab: Use page struct fields instead of casting
mm, sl[aou]b: Extract common fields from struct kmem_cache
mm, sl[aou]b: Extract common code for kmem_cache_create()
slab/mempolicy: always use local policy from interrupt context
slub: refactoring unfreeze_partials()
mm: sl[au]b: add knowledge of PFMEMALLOC reserve pages
mm/slub: Use kmem_cache for the kmem_cache structure
mm: introduce __GFP_MEMALLOC to allow access to emergency reserves
sync: don't block the flusher thread waiting on IO
decompressor: Add LZ4 decompressor module
lib: Add support for LZ4-compressed kernel
arm: Add support for LZ4-compressed kernel
lib: Add lz4 compressor module
crypto: Add lz4 Cryptographic AP
random: make 'add_interrupt_randomness()' do something sane
random: use lockless techniques in the interrupt path
random: create add_device_randomness() interface
random: add new get_random_bytes_arch() function
random: remove rand_initialize_irq()
random: mix in architectural randomness in extract_buf()
random: make it possible to enable debugging without rebuild
Many other patches
Added 3.4.66 Linux Patches
Added CPU OC frequencies ( 2343 - 2419 - 2496 Mhz)
Added GPU OC upto 533mhz
Added L2 cache overclock ( 1808 mhz)
Reverted to normal thermal sensor
random: entropy tweaks are all the rage nowadays
sched: Micro-optimize the smart wake-affine logic
sched: Implement smarter wake-affine logic
sched: Fix SCHED_HRTICK bug leading to late preemption of tasks
sched: Reset rq->next_interval before going idle
sched: Unthrottle rt runqueues in __disable_runtime()
sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
sched: change active_load_balance_cpu_stop to use h_nr_running
sched: change find_busiest_queue to h_nr_running
sched: change update_sg_lb_stats to h_nr_running
sched: change pick_next_task_fair to h_nr_running
sched: change cpu_avg_load_per_task using h_nr_running
sched: change load balance number to h_nr_running of run queue
sched: Periodically decay max cost of idle balance
sched: Consider max cost of idle balance per sched domain
sched: Reduce overestimating rq->avg_idle
sched: scale cpu load for judgment of group imbalance
sched: scale the busy and this queue's per-task load before compare
sched: reduce calculation effort in fix_small_imbalance
sched: remove WARN_ON(!sd) from init_sched_groups_power()
sched: don't call get_group() for covered cpus
sched: Use cached value of span instead of calling sched_domain_span()
sched: Optimize build_sched_domains() for saving first SD node for a cpu
sched: Remove unused params of build_sched_domain()
msm: cpufreq: Add support for CPU clocks and msm-cpufreq device
msm: cpufreq: Relax constraints on "msm-cpufreq" workqueue
cpufreq: enable sibling cpu policy sharing
lib: Sparc's strncpy_from_user is generic enough, move under lib/
word-at-a-time: make the interfaces truly generic
lib: add generic strnlen_user() function
lib: Fix generic strnlen_user for 32-bit big-endian machines
ARM: use generic strnlen_user and strncpy_from_user functions
cpufreq: Fix printing of governor and driver name the correct way
msm: cpufreq: Initialize cpufreq driver early at boot
v1.0.1F
http://dfiles.eu/files/2immleje5
Added Linux patches up to 3.0.65
Added and enabled UC Frequencies (105 - 201 Mhz)
Added F2FS filesystem support
SEC_DEBUG Disabled and fix compilation issue
Added Frandom
Add a simple governor for GPU
CPU unaligned access path
Added kthermal
Added and enabled RWSEM_XCHGADD_ALGORITHM for ARM
Fixed Zram and enabled
Added Memory Controller
mm.h: Set VM_MAX_READAHEAD to 1024
lib: Introduce some memory copy macros and functions
lib: Improve the performance of memcpy and memmove
Sched: Folding nohz load accounting more accurate
mm: slub: Try setting slub_max_order to zero
mm: slub: Memory allocated by kstrdup should be freed, when kmalloc(…mem_size, GFP_KERNEL) is failed.
mm: Adjust dirty writeback for IO boost
aio.c: Asynchronous I/O latency to a solid-state disk greatly increased
mm: Modify page_alloc to analyze zone for NULL condition
msm: restart: Always use Samsung magic restart reason
net: Enable TCP Congestion Advanced, enable westwood and set as default
Compile with -pipe
Other Patches
Based on Samsung SM-N9005 Kernel Sources
Linaro Toolchain 4.8.2
Selinux Permissive
Added 27 steps frequency (300 - 2265)
Added Voltage Control interface
Governor: Pegasusq, performance, powersave, userspace, conservative, intellidemand, Lionheart, AbyssplugV2, interactive, smartmax, wheatley, adaptive, Ondemand (default).
CPU i/o Scheduler: BFQ, row (default), cfq, deadline, sio, noop, vr, fifo, fiops, zen.
Added and enabled Auto-hotplug
Gentle_fair_sleepers configurable (disabled as default)
XZ compression
Exfat Support enabled
Added cgroup_timer_slack
cgroup_timer_slack: Added dynamic management of timer slack
Added Dynamic Fsync
Enabled Cleancache
Enabled Swap
Enabled Hard-float
Added NTFS support
Added UKSM from 3.9.x linux
Auto-Root added
init.d Support
Other patches
v1.0.0
http://dfiles.eu/files/vqzqnby0s
Based on Samsung SM-N9005 Kernel Sources
Linaro Toolchain 4.8.2
Selinux Permissive
Added 27 steps frequency (300 - 2265)
Added Voltage Control interface
Governor: Pegasusq, performance, powersave, userspace, conservative, intellidemand, Lionheart, AbyssplugV2, interactive, smartmax, wheatley, adaptive, Ondemand (default).
CPU i/o Scheduler: BFQ, row (default), cfq, deadline, sio, noop, vr, fifo, fiops, zen.
Added and enabled Auto-hotplug
Gentle_fair_sleepers configurable (disabled as default)
XZ compression
Exfat Support enabled
Added cgroup_timer_slack
cgroup_timer_slack: Added dynamic management of timer slack
Added Dynamic Fsync
Enabled Cleancache
Enabled Swap
Enabled Hard-float
Added NTFS support
Added UKSM from 3.9.x linux
Auto-Root added
init.d Support
Other patches
AW: [Kernel] AbyssN3 Kernel v1.0.0 (SM-N9005) Stable Version
Wow - schon ein Kernel da ... :top:
AW: [Kernel] AbyssN3 Kernel v1.0.0 (SM-N9005) Stable Version
Man beachte "Selinux Permissive"!;)
AW: [Kernel] AbyssN3 Kernel v1.0.0 (SM-N9005) Stable Version
AW: [Kernel] AbyssN3 Kernel v1.0.0 (SM-N9005) Stable Version
Zitat:
Zitat von
aljee77
Man beachte "Selinux Permissive"!;)
Ähhh ... nochmal: Was bedeutet das ?
AW: [Kernel] AbyssN3 Kernel v1.0.0 (SM-N9005) Stable Version
SELinux ist/soll eine Sicherheitsverbesserung in dem Linux Kernel sein, welche maßgeblich von der NSA und noch einem Unternehmen entwickelt wurde. Dieser war auch schon beim S4 vorhanden aber bis zu den Firmware mit dem neuen Bootloader nicht aktiv.
AW: [Kernel] AbyssN3 Kernel v1.0.0 (SM-N9005) Stable Version
Es gibt schon den Abyss v1.2.0
AW: [Kernel] AbyssN3 Kernel v1.3.0 (SM-N9005) Stable Version
Ersten Post mal auf v1.30 aktualisiert.;)
AW: [Kernel] AbyssN3 Kernel v1.3.0 (SM-N9005) Stable Version
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
Hat jemand diesen Kernel zusammen mit der X-Note V5 laufen? Oder ist der nur für die Original Samsung Firmware.
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
Ich habe die v1.4.0 seit einer Std. auf dem Echoe Rom MJ7 laufen, kann bisher noch nichts nachteiliges sagen. Der Kernel läuft auf allen Samsung Rom´s und darauf basierenden Custom Rom´s ab der MJ6.;)
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
Wie ist das eigentlich mit diesem (zusätzlichen) Kernel-Counter ??
Man sieht ja im Download-Modus neben dem vielbesagten Knox-Counter auch noch einen "Kernel-Counter", der im Originalzustand ebenfalls auf 0x0 steht. Geht der dann nach dem Flashen eines Custom-Kernels genauso auf 0x1 hoch, wie der Knox-Counter ?
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
Hätte ich auch erwartet, da nach dem flashen jetzt bei jedem Start oben li., ähnlich wie wenn man in das Recovery bootet, folgende Schriftzüge erscheinen. In rot "Kernel is not SEANDROID Enforcing" und in gelb "Set Warranty Bit: Kernel". Knox Kernel Lock bleibt aber auf 0x0 stehen.
Der Kernel selber läuft gut und ich habe das Gefühl auch etwas flüssiger wie der Stock, zum Akkuverbrauch kann ich noch nichts sagen.;)
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
Hast Du mal probiert, was passiert, wenn Du danach nun wieder den Stock-Kernel flashst ?? ;-) Das wäre mal interessant - was steht dann beim Booten ? Ist dann alles wieder "bereinigt" und im Originalzustand (außer dem Knox-Counter natürlich) ?
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
Wollte ich später mal testen.;) Hab auch seit gestern den ersten Custom Kernel auf dem Note. Werde gleich mal berichten.
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
So, hab jetzt den Stock Kernel drüber geflasht und es ist wieder alles wie vorher. SELinux steht wieder auf "Enforcing", Knox Kernel Lock bleibt auf 0x0 und die Schrift oben li. erscheint auch nicht mehr.;)
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
Das tönt super !! Also wenigstens beim Kernel-flashen lässt man uns in Ruhe :zustimm: :mrgreen:
AW: [Kernel] AbyssN3 Kernel v1.4.0 (SM-N9005) Stable Version
Stable 1.50 ist draussen..
http://www.nonsolosmartphone.it/abys...005-t7846.html
---------- Hinzugefügt um 18:07 ---------- Vorheriger Beitrag war um 15:32 ----------
Habe die Version gerade geflasht in Verbindung mit Omega v4...beides TOP ;) :D
AW: [Kernel] AbyssN3 Kernel v1.5.0 (SM-N9005) Stable Version
OP aktualisiert, ich werde aber morgen erst zum flashen kommen, bin mit meinem s4 beschäftigt.
AW: [Kernel] AbyssN3 Kernel v1.5.0 (SM-N9005) Stable Version
Also die 1.40 lief auch super, eigentlich merke ich keinen grossen Unterschied...:)
---------- Hinzugefügt um 21:40 ---------- Vorheriger Beitrag war um 21:23 ----------
Zitat:
Zitat von
aljee77
OP aktualisiert, ich werde aber morgen erst zum flashen kommen, bin mit meinem s4 beschäftigt.
Am Anfang im Thread bei der Überschrift mit roter Farbe steht noch 1.40...