[KERNEL][ICS][ExTweaks][All-in-1kernel][DualBoot] SiyahKernel v5.0.1

Welche undervolting-Werte benutzt ihr eigentlich unter diesem Kernel??

Zitat von gcmobile

Welche undervolting-Werte benutzt ihr eigentlich unter diesem Kernel??

Mit SiyahKernel v3.2b4

I/O Scheduler: cfq
CPU Governor: ondemand
Min/Max Mhz: 200 - 1200

Voltages:
200MHz - 850mV
500MHz - 900mV
800MHz - 1000mV
1000MHz - 1100mV
1200MHz - 1200mV

SiyahKernel v3.2b5
Posted on May 1, 2012

Changelog:

• fixed some BLN problems
• CM9 ROMs: lights will stay off after BLN if you disabled lights, stay on if you have them enabled.
• if you set lights timeout, lights will turn on when you touch keypad or screen and turn off again after the timeout (just as in Samsung ROMs)
• removed breathing setting and added bln_effect setting. available options are “steady”, “breathing” and “blinking”.
• added breathing_start (mV), breathing_end (mV), breathing_period (ms), breathing_step (mV) interfaces to notification miscdevice. further customizations are possible by modifying those such as faster blinking or less brighter breathing.
• touchscreen sensitivity is changed again
• testing old GB hotplug (thanks to Entropy512 for porting it)
• added touchpad led brightness level control to BLN tab in ExTweaks

http://gokhanmoral.desean.net/siyahk...yah-v3.2b5.tar

http://gokhanmoral.desean.net/siyahk...v3.2b5-CWM.zip

SiyahKernel v3.2b6
Posted on May 1, 2012

Changelog:

added customvoltage interface to modify internal voltages because it is already supported by nstools (thanks to Ezekeel).
testing possible fix for “INFO: rcu_sched detected stalls on CPUs/tasks” (back to stand-hotplug)
fixed BLN breathing settings reverting when ExTweaks is launched.
added confirmation before backup actions in CWM recovery
added double-tap selection to CWM recovery
GB touch sensitivity when on battery.



http://www.gokhanmoral.com/public/fi...yah-v3.2b6.tar

http://www.gokhanmoral.com/public/fi...v3.2b6-CWM.zip

SiyahKernel v3.2b7
Posted on May 3, 2012

Changelog:

• added format SecondROM system, data and cache partitions.
• enabled kernel panic timeout
• nandroid backup of SecondROM
• nandroid restore to SecondROM (kernel will not be restored if you restore to SecondROM)
• fixed wifi “Unable to handle kernel NULL pointer dereference at virtual address 00000000″ problem in wl_cfg80211_connect
• lots of new patches&backports (for lowmemorykiller, bcmdhd and arm related) from myfluxi’s repo (thanks to myfluxi)
• support for NTT-Docomo variant

Wird bald veröffentlich

D.h. Links kommen bald.

Als RandNotiz:

Nach dem b7 ist erst einmal Pause da gokhanmoral (der Entwickler ist das) sein Gerät einschicken muss.

und je nach dem was da raus kommt... kauft er gleich s3

Mhhhh, hat er sein Gerät mit seinen eigenen Kernel gehimmelt?

Zitat von diddsen

und je nach dem was da raus kommt... kauft er gleich s3

Das kann mir nur recht sein, werde es mir auch holen!!!

Edit: Hier das Kommentar von Gokhanmoral, er wir aber schon die Entwicklung des Kernel für das SGS 2 zu Ende führen!

Zitat von gokhanmoral

guys, I think you misunderstood or I could not express it correctly.
I will not sell or dispose my sgs2.
but I don't like the screen with this problem.
replacing the screen is not worth when we have a new galaxy device. so, if the screen is not replaced on guarantee I will buy sgs3 and keep my sgs2.

anyway... that is my problem, and I hope it will not affect the progress of this kernel.
I am trying to finish the implementation for flashing CWM zips to secondrom.
if I cannot finish it by tomorrow I will release it in beta8 later.

SiyahKernel v3.2b7
Posted on May 4, 2012

Changelog:

• added format SecondROM system, data and cache partitions.
• enabled kernel panic timeout
• nandroid backup of SecondROM
• nandroid restore to SecondROM (kernel will not be restored if you restore to SecondROM). restoring data partition will take long because formatting a loop mounted image file takes long.
• fixed wifi “Unable to handle kernel NULL pointer dereference at virtual address 00000000″ problem in wl_cfg80211_connect
• lots of new patches&backports (for lowmemorykiller, bcmdhd and arm related) from myfluxi’s repo (thanks to myfluxi)
• support for NTT-Docomo variant (you will need to “echo 16 > /proc/sys/kernel/rom_feature_set” to get gps working. I hope someone will prepare a flashable CWM file for ntt-docomo variant)
• disabled smooth scaling for all governors except for ondemand
• changed conservative governor settings a little

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

SiyahKernel v3.2b8
Posted on May 4, 2012

Changelog:

• 18-steps as default
• multiple breathing steps for BLN, maximum 10 steps, asymmetric. see /res/customconfig/actions/bln_steps for examples.
• fixed nandroid backup
• removed busfreq voltage control (aka internal voltage)
• new feature: “install zip to secondrom from internal sdcard” and “install zip to secondrom from external sdcard”.
  
• if you want to install a ROM directly as SecondROM make sure you format “/secondrom_data” and “/secondrom_cache” before installing the ROM using this feature.
• installing zips from dual-boot menu will prevent any kernel installation to avoid confusion and need to reflash siyahkernel back. original “install zip” feature will still flash kernels.
• this feature assumes that you already have a SecondROM. or formatted /secondrom_data.and /secondrom_cache.
• This part is also implemented. if you use a kitchen app, rom updater or CWM app in second rom the selected update will be flashed to the 2ndROM on boot.

DOWNLOADS, SIEHE NÄCHSTER POST!!!

Originally Posted by gokhanmoral good news: I managed to flash CWM zip directly to secondrom.
you can even install a ROM directly as second rom.
I will try to complete the implementation tonight and test it tomorrow.

another good news is that I had my sgs2 lcd (actually full body) replaced today.
it means I am not leaving sgs2 any time soon

Da isser
Damit geht nun auch wieder ein Nandroid-Backup.

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

@Luqutus, sorry füs´s Bearbeiten des Posts, ist aber wegen der Verlinkung im Ersten Post Übersichtlicher!

Ja kein Ding, als ich das gepostet hatte waren die links ja noch nicht draußen.

Weitermachen.

SiyahKernel v3.2rc1
Posted on May 8, 2012

Changelog:

• fixed “view status” in dual-boot menu
• new feature: “Wipe 2ndROM dalvik cache”
• changed dual-boot menu item texts a little to make them more clear
• lots of code cleanups, especially BLN related
• added ftdi_sio.ko (usb-to-serial converter module)
• fixed “format secondrom_data” or “format secondrom_cache” not working if there is no /sdcard/.secondrom folder
• merged usb host drivers with sztupy’s build 5 usb host driver changes
• merged with Linux 3.0.31

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

SiyahKernel v3.2rc2
Posted on May 9, 2012 by admin
Changelog:

■disabled ESCAN_RESULT_PATCH in wifi driver
■auto-reset extweaks profiles if customconfig.xml is changed
■default i/o scheduler is set to sio for all profiles
■increased brightness level for battery profile
■undervolted gpu steps by 50mV in default profile

http://www.gokhanmoral.com/public/fi...ah-v3.2rc2.tar

http://www.gokhanmoral.com/public/fi...3.2rc2-CWM.zip

Das geht ja mal wieder schnell! Die rc2 konnte ich ja nur paar Stunden testen, aber die lief viel besser wie die rc1! Mit der hatte ich ganz schön Hänger!

SiyahKernel v3.2
Posted on May 10, 2012

Changelog:

• removed nandroid backup from/restore to 2ndROM. There is a problem which I have just noticed and it will take some time to fix that. Use swap&backup until I fix it.
• default lower cpu step is set to 100MHz
• your extweaks settings will be automatically reset after flashing this version
• used Linaro toolchain 4.7 (2012.04) which let me use gzip without exceeding 8MB

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

Edit: Ich bin begeistert, die v3.2 hat ein echt gutes Touch und Scroll verhalten!

SiyahKernel v3.2.1
Posted on May 10, 2012

Changelog:

• removed ntfs-3g from the payload part to make the kernel smaller (I want to enable LZO instead of GZIP). if you want ntfs-3g you can find it here
• enabled kernel’s ntfs support to mount usb flashes in read-only mode
• LZO, to have even faster booting
• re-enabled j4fs and mounting of lfs partition (hellcat’s boot logo changer worked, even if it stuck with “working” popup, but it could successfully set my cat’s photo as a boot logo )
• reverted 267MHz GPU voltage back to 1000mV. if you did not have a problem with v3.2, you can set it back to 950 (or even lower) with ExTweaks.
• fixed vdd_levels interface. it was supposed to be using milivolts but I noticed that it was using microvolts when I tried to echoing it ‘-50′ to undervolt all steps by 50mV.

DOWNLOAD TAR (for Odin)

DOWNLOAD ZIP (for CWM Recovery)

Wann schläft, isst, trinkt und lebt dieser Mensch?

SiyahKernel v3.2.2
Posted on May 13, 2012

Changelog:

• added support for Boot-to-Gecko (b2g) (thanks to pulser)
• slightly modified panel gamma set to have smoother transition for low-level lights and this will also help a little with the battery life when the screen is on.
• removed LCD panel undervolting to prevent grayish tint with low brightness
• enabled SCHED_AUTOGROUP once again
• added “Wipe 2ndROM data/cache” to dual-boot menu in recovery. remember that it will take long if you do not have 2ndROM data and cache files in your sdcard.
• led fade-in/fade-out effects. only fade-out is available in extweaks for now as fade-in implementation is not complete.
• modified panel gamma set and added a lower brightness level as the first step. if you find it too low you can set min_gamma to 1 to have stock brightness level as in GB kernel.

DOWNLOAD TAR (for Odin)


DOWNLOAD ZIP (for CWM Recovery)

@aljee77, ich bin nach lange Zeit wieder zurück zu Siyah gekommen, leider bin ich hiermit aus der Übung gegangen.
kannst mir bitte sagen wie ich die beste Akkuleistung erzielen kann?
Danke im Voraus.