[Kernel] Abyss ICS kernel v3.2 (14.05.12)

Abyss ICS kernel 3.2 Final Stable Version by angelom

Original Thread: http://www.nonsolosmartphone.it/abys...rnel-t133.html

Nur für Samsung Rom´s!

Installation:

Tar Version:
Download Flashen mit Odin als PDA

CWM version (Kommt noch):
Download Kopieren auf sdcard/internal storage Flashen mit CWM Recovery "intall zip from sdcard"

Download: http://www.mediafire.com/?9qm2bjx0fxlbmix


Changelog v3.2:

• Fixed vdd_levels interface
• mmc: increase mmc read and write timeout
• Fixed auto-brightness as stock (if you use S90abyss script, set min_gamma = 1)
• mxt224_u1: Fix typo in touch sysfs interface
• touchscreen; Update touch values according to power state
• mm: adjust vm ratios
• usb:gadget:android: avoid sending extra uevents
• arch/arm/return_address.c: hide annoying warning
• arm: mm: fixing 'offset.un' may be used uninitialized in this function
• reverted rwsem XCHGADD algorithm

Code:

Changelog v3.1:


ipv6: check return value for dst_alloc
Re-enabled HRTICK
usb: disable parent hub tt detection to get HID devices working
Re-added pegasusq governor
Undervolted LCD regulator
mali: Lower allocation order
u1-otg: disable irqs on dev when otg host is stopped
Added in recovery: Download mode Reset Counter (FOR EMERGENCY ONLY)
Other little fix

Changelog v3.0:


Update to Linux 3.0.31
2core issue fixed
Re-enabled Joe's RCU
Touchscreen tweaked
Added blink in bln
Modified stand-hotplug
Modified Ondemand Governor for max responsiveness
mmc: unbreak sdhci-esdhc-imx on i.MX25
KVM: unmap pages from the iommu when slots are removed
mach-exynos: clock-exynos4: sync clock related exynos4210 code with update5 sources
EHCI: fix criterion for resuming the root hub
NFSv4: Ensure that the LOCK code sets exception->inode
Removed Cuse module

Changelog v2.9:


Fixed a potential bug in mm/memblock.c
memblock: Make memblock functions handle overflowing range
memblock: Kill memblock_init()
memblock: Use memblock_reserve() in memblock internal functions
memblock: Implement for_each_free_mem_range()
memblock: Make memblock_alloc_[try_]nid() top-down
memblock: Use round_up/down() instead of memblock_align_up/down()
ld9040: fixed gamma steps
set allocation order to 6 in mali driver
Added two new levels ( 7 in total ) in asv bus table
Added ASV Bus Table Menu in recovery

Changelog 2.8:


Improved stability and performance
Increased number of gamma levels
Interactive governor : add boost pulse interface
cpufreq: improved frequency regulation based on screen on/off events
lowmemorykiller: convert to use oom_score_adj
lowmemorykiller: remove task handoff notifier
Revert: Added ALLOW_CPU_ALIGNMENT
Disabled HRTICK
Fixed recovery.fstab
Added undervolt GPU code in s90abyss script
Fixed Recovery menu
Fixed random reboot in recovery
Other small fixes

Changelog v2.7:


Reverted Cpu_aligmnent, may cause SOD
Revert GB_policy, may cause SOD
inserted BLN low powe
MALI: Added 3-step GPU DVFS control
staging: android/lowmemorykiller: No need for task->signal check
staging: android/lowmemorykiller: Do not kill kernel threads
arm: vfp: Fix memory corruption on PM suspend
ARM: vfp: only clear vfp state for current cpu in vfp_pm_suspend
BUSFREQ: increased uptheshold
New S90abyss script with support 3-step GPU and Fix CPU UV
Added idle mode menu in recovery
Added 2 Core menu in recovery

Changelog 2.6F:


Updated to Linux 3.0.30
ARM: smp: Align secondary_start_kernel with mainline
sched: Cleanup cpu_active madness
ARM: SMP: use a timing out completion for cpu hotplug
Ext4: add FALLOC_FL_NO_HIDE_STALE support
cpufreq_conservative: Bump default frequency step up to 10
Enabled kernel panic timeout
Revert "exynos4: Disable SW downclock in cpuidle"
nohz: Fix stale jiffies update in tick_nohz_restart()
tcp: fix TCP_MAXSEG for established IPv6 passive sockets
Increased auto-brightness
Set GPU level 0 and level 1 freq to 267mhz as default
Enabler logger module on boot for compatibility with some apps
Wifi toggle fix
Fix Touchkey lights
New Recovery CWM modded by me
Removed Old Abyss Script
Disabled/Enabled BLN form recovery
Enabled/Disabled AFTR idle from recovery
Enabled/Disabled MC_sched from recovery
Added in recovery Root installer
Added in recovery S90Abyss Script installer (With all functions of old Abyss script, + added Gamma level settings, Touch Sensivity settings)
Added in recovery S90 Abyss Script remove
You can select ASV CPU Table in recovery (Default = 3)
Yoy can select Vibration Level in recovery (Default = 6)
Others small Fix

Changelog v2.5:


exynos4: hotplug: Added Gingerbread legacy hotplug with tegrak 2nd core support
config: Switch to Gingerbread legacy hotplug
Disabled GENTLE_FAIR_SLEEPERS
ashmem: Added cache flush routines to ashmem
ashmem: Fix flush routine of ashmem
Added -fgcse-sm cflag in makefile
Changed to CC_OPTIMIZE_FOR_SIZE
Added Charge Current Interface
Added 2 script (optionals) S91asvscript, S91uvscript
Added in script adjustable vibrate level selection
Added in script bln activation with energy saver
Added in script GPU frequency selection values
Added in script Charge Current secection values
Other small fixes

Changelog v2.4:


Fixed adjustable settings for mdnie
Fixed adjustable gamma levels for lcd
Fixed adjustable vibrator levels
Others small fix

Changelog v2.3:


Added and enabled Joe's RCU
Added and enabled cpu based sync driver
Addeded and enabled synchronization framework
Added poll support for sync
Enabled BCJ filters on SPARC and 32-bit x86
smb136: Removed mach/gpio-p2.h include
arm: removed stale export of 'sha_transform'
Changed configuration
Others small fix

Changelog v2.2:


Fixed adjustable settings for mdnie
Fixed adjustable gamma levels for lcd
Fixed adjustable vibrator levels
Others small fix

Changelog v2.1:


Added Linux 3.0.28 patches
Updated mali drivers
Missing irq_enter/irq_exit wrap around ipi_timer() after backporting
Fix sections mismatch
Added input key fix by Tegrak
Decreased interval of suspend_backoff
Fixed Standard profile (Default) with many optimizations for performance and battery
Others small fix

Changelog v2.0:


Added adjustable settings for mdnie
Added adjustable gamma levels for lcd
Added adjustable vibrator levels
Added several patches for idle
Set initial state for proximity sensor
Modified sio i/o scheduler
Modified interactive governor for add responsiveness at lower frequencies
Modified ondemand governor for add responsiveness at lower frequencies
Fixed rcu stalls on SMP platforms…
Other small fix

Changelog v1.8:


Added scaling_min_suspend_freq and scaling_max_suspend_freq modifiable via script
Removed noise microphone to reboot
Enabled GENTLE_FAIR_SLEEPERS
Set CONFIG_FRAME_WARN to 2048
Corrected several warnings
Changed to Linaro 4.7 toolchain
Other small changes

Changelog v1.7:


Added asv voltage table elements selectable
Changed asv voltage table
Disabled old s5pv310 pm-hotplug module
Enabled Stochastic Fair Blue NET scheduler
Touch sensibility corrected a bit
Added XXLPS initramfs
Revert to Superuser from Supersu
other small fixes

Changelog v1.6:


Theme Flash issue fixed
Added and enabled old s5pv310 pm-hotplug module
Touch sensibility increased again
Enabled Logger as module
Fix warnings introduced by enter_cpuidle
Added new netlink msg type for IDLETIMER
Wireless: Decreased event wake_lock timeout to 1500 ms
wireless: Fixed frame sequence lag issue
Added latest adbd
Others small fixes

Changelog v1.5:


Added ICS 3.0.27 patch
Added intellidemand governor
Added CW Touch recovery 5.5.0.4 v8
Higher touch sensibility when phone charging
Changed GPU clock default to 266Mhz
Changed to Abyssplug as default governor
Changed deadline iosched fifo_batch 16 -> 1
slub: fix a possible memleak in __slab_alloc()
mm: slub: Default slub_max_order to 0
Enabled SLUB
Disableb SW downclock in cpuidle
Others little fix 

S91uvprofile Script für Undervolt Anpassung (NEW):

http://www.mediafire.com/?5bhp0mlxrnpmskm

1) Script aus der Undervolt Zip-Datei extrahieren
2) Öffnen und bearbeiten Sie die "S91uvprofile" Datei mit einem Texteditor

Hier die enthaltenden und zu ändernden Werte:

• Maximale Frequenz
• Low Frequency
• Suspend High Frequency
• Suspend Low Frequency
• Gouverneur
• CPU-I / O-Scheduler
• Ändern der Spannung von jeder einzelnen Frequenz
• Aktivieren oder Deaktivieren der BLN (Default OFF)
• Ändern Sie den Wert der Ladestrom (eingetragene Werte sind der Standard)
• Ändern Sie den Betrieb Frequenzen der GPU
• Ändern der Vibrationen

3) Speichern Sie die neue Datei
4) Kopieren Sie das Script in / System / etc / init.d mit folgenden Permissions Read/Write/Execute für Owner/Group/Others
5) Neu starten
----------------------------------------------------------------------------

S91asvprofile Script (NEW)::

http://www.mediafire.com/?222r5u4hjsl8d9b

Mit diesem Script könnt Ihr folgendes ändern:

• ASV Table (siehe Tabelle)
• Maximale Frequenz
• Low Frequency
• Suspend High Frequency
• Suspend Low Frequency
• Gouverneur
• CPU-I / O-Scheduler
• Ein Satz von Tabellen für die voreingestellte Spannung
• Aktivieren oder Deaktivieren der BLN (Default OFF)
• Ändern Sie den Wert der Ladestrom (eingetragene Werte sind der Standard)
• Ändern Sie den Betrieb Frequenzen der GPU
• Ändern der Vibrationen

Die Werte des Scripts könnt Ihr durch das Editieren des Scripts auf Eure Wünsche anpassen. Die zip entpacken und das "S91profile" Script nach etc/init.d kopieren mit folgenden Permissions Read/Write/Execute für Owner/Group/Others!

HINWEIS: Ihr dürft nur eines der beiden Scripte verwenden. Verwendet nie beide zusammen!

Hier eine Tabelle der einzelnen "ASV_TABLE" im "S91profile" Script zum Einstellen der CPU-Spannung:
----------------------------------------------------------------------------------------------------


Es gibt 8 Einstellungen der CPU-Spannung, von 0-7 zu lesen von links nach rechts. Unter der folgenden Value kann man die Spannung im Script ändern:

echo "(number_asv_table) " > /sys/devices/system/cpu0/cpufreq/asv_table

Standard "asv_table" im Kernel ist 3!

Hier ein Video zum ändern der Permissions:



Und hier ein Video zum ändern des Scripts:

Hat jemand scgon erfahrungen mit der ics version gemacht?

Sent from my GT-I9100 using Tapatalk 2

Version 2.0 ist released!
Kannst du mal updaten?

Sent from my GT-I9100 using Tapatalk

Ersten Post auf v2.0 aktuallisiert!!!

Abyss ICS kernel 2.1 Stable Version by me

http://www.mediafire.com/?iu515t11tyyvxg9

Changelog:

Added Linux 3.0.28 patches
Updated mali drivers
Missing irq_enter/irq_exit wrap around ipi_timer() after backporting
Fix sections mismatch
Added input key fix by Tegrak
Decreased interval of suspend_backoff
Fixed Standard profile (Default) with many optimizations for performance and battery
Others small fix


P.S. ich verstehe bahnhof von diese Scripts geschichten
Wo kann ich UV werte finden , google hilft mir darüber gerade nicht.

Du findest im ersten Post eine Tabelle mit Voltage Einstellungen für die einzelnen CPU Takte, von 0-7 von links nach rechts zu lesen! Hier im Script muss dann nur eine Zahl von 0-7 (in Rot), je nach gewünschter CPU-Spannung, eintragen werden!

Code:

#!/system/bin/sh

sleep 20
echo "Start workingÉ"

#customize the following line for ASV_TABLE
NEW_TABLE="4 "

# TABLE INFO:
# 0-7 are valid values

echo "Set MIN Scaling Frequency"
# Info:
# 25000-1600000 are valid values

echo "25000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
echo ""

echo "Set MAX Scaling Frequency"
# Info:
# 25000-1600000 are valid values

echo "1200000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
echo ""

echo "Set Min Scaling Suspend Frequency"
# Info:
# 25000-1600000 are valid values

echo "100000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_suspend_freq
echo ""

echo "Set Max Scaling Suspend Frequency"
# Info:
# 25000-1600000 are valid values

echo "500000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_suspend_freq
echo ""

echo "Set Scheduler for stl, bml and mmc"

for i in `ls /sys/block/stl*` /sys/block/bml* /sys/block/mmcblk* /sys/block/mtdblock* ; do
        echo "sio" > $i/queue/scheduler;
        echo "$i/queue/scheduler";
done;

echo "Set governor"

echo "abyssplug" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

echo ""

echo "Set ASV_TABLE"

if [ -e /sys/devices/system/cpu/cpu0/cpufreq/asv_group ];
then
  echo "Previous ASV_TABLE:"
  cat /sys/devices/system/cpu/cpu0/cpufreq/asv_group
  echo $NEW_TABLE > /sys/devices/system/cpu/cpu0/cpufreq/asv_group
  echo "New ASV_TABLE:"
  cat /sys/devices/system/cpu/cpu0/cpufreq/asv_group
fi;

Update auf v2.5 und neu Scripte hinzugefügt!!!